Installation
Professional UK Fitting
Fast Delivery
Next Day Delivery
Secure
Payment & Checkout
-
Baros Technology Ltd, Maidstone, Kent, ME17 2BP
Nitro Immobiliser Pro (Car and Van) with Installation
£379.00 Ex. VAT
- No cables in the vehicle are cut during installation
- Immobilisation by CAN data communication with the control button of the car
- 1 to 15-digit PIN code via CAN and LIN Bus supported buttons in the steering wheel or dashboard
- The Nitro Immobiliser Pro electronics cannot be tracked in the vehicle
- The immobiliser cannot be bypassed electronically
- No radio signals are sent or received
- No additional remote controls or transponders are needed
- Uses the vehicle’s own CAN and LIN data bus
- Silent operation without relay click noise
- PIN code can be changed at any time
- Service mode for garages or valet parking
- Deactivate immobiliser by using the optional WFST400 Transponder
- Deactivate immobiliser by using Apple iPhone or Android Smartphone connected to the App
- TASSA approved and accredited installation included
- Description
- Additional information
- Reviews (0)
- Nationwide Installation Services
- Technical Spec
- Optional Extras
Tassa Approved
passed independent, industry-recognised testing for quality, security, and installation
Nitro Immobiliser Pro
The Nitro Immobiliser is an advanced CAN BUS vehicle security system designed to protect modern cars and vans from theft using sophisticated digital immobilisation technology. Unlike traditional alarms, the Nitro Immobiliser works silently in the background, preventing the engine from starting unless the correct driver authentication sequence is entered.
This intelligent immobiliser helps protect your vehicle against:
- Key cloning
- Keyless entry relay attacks
- OBD hacking and key programming theft
- ECU swapping
- Vehicle key signal interception
- Modern electronic vehicle theft techniques
Because the system integrates directly with the vehicle’s CAN BUS network, there are no visible keypads, flashing LEDs, or additional remotes that could reveal the presence or location of the immobiliser. Its compact design allows for a completely covert installation within the vehicle’s wiring system, making it extremely difficult for thieves to detect or bypass.
The Nitro Immobiliser arms automatically when the ignition is switched off. To disarm the system before driving, the driver enters a unique PIN sequence using existing factory vehicle controls such as steering wheel buttons, dashboard controls, or infotainment buttons. The selected PIN works similarly to a banking PIN code, providing an extra layer of protection even if thieves possess the original vehicle key.
Designed for compatibility with a wide range of modern vehicles, the Nitro Immobiliser delivers discreet yet highly effective protection without interfering with the normal operation of the vehicle.
Professionally installed systems ensure optimal integration, reliability, and maximum security performance for your vehicle.
| Dash Cams | ||||
|---|---|---|---|---|
|
||||
| Specification | ||||
|
||||
Be the first to review “Nitro Immobiliser Pro (Car and Van) with Installation”
NATIONWIDE INSTALLATION
With our professional installation team of expert fully qualified auto electricians, our engineers will make sure you and your vehicle receive the right care and attention to detail with no unsightly wires or holes in the interior, looking as good as new. To reiterate all cables are concealed. We will ensure that you are 100% happy with your immobiliser system on completion. As soon as your order has been placed, we will arrange for the engineer to install at a location and time to suit you.
We can install your system at any location convenient to you anywhere in the UK. The process is as follows:
- Place your order.
- We will contact you to get more details such as car make, model and registration and confirm where you would like the installation to take place.
- We will then contact you directly to arrange a convenient date and time to suit you.
- We aim to install your immobilser system as quickly as possible after ordering. However, this is dependent on both customer vehicle and installation engineer availability.
- The engineer will bring the immobiliser.
TECHNICAL SPECIFICATIONS
- Operating voltage: 9–16 VDC.
- Sleep current: < 0.3 mA.
- Working current: < 26 mA.
- Dimensions: 25 x 20 x 7 mm.
- Weight: 21 g, including module and wiring loom.
You may also like…
Related products
Fast UK Shipping & Installation
Next-day shipping if ordered before midday coupled with installation.
Secure Payments
Shop confidentially with a variety of secure payment options.
Expert Support
We know its technical, that's why we are on hand to answer all your technical questions.
Reviews
There are no reviews yet.